Replacement Filter Pack Triple Bench Alkaline Fluoride Aragon
Couldn't load pickup availability

FREE SHIPPING for orders over $100 in Australia.
Flat $10 shipping fee for orders under $100.
We use several couriers including Australia Post, Sendle and others.
Overseas orders. discounted shipping is calculated during checkout.
Stage 1 - Fluoride Removal
This fluoride removal filter made in the USA effectively removes fluoride in your drinking water up to 97%. The fluoride removal media is made from the same minerals that rubies and sapphires are made from in crystalline form.
The filtration process is called "selective absorption". Which is a mixture of physical/chemical reaction where the fluoride ions are removed by binding to the medias oxidised surface.
This is a very highly porous material with a massive surface area of 200 square metres per gram, providing great fluoride filtration results.
Stage 2 - Aragon
This Aragon drinking water filter cartridge is imported from Europe. It is the perfect solution for creating safe, good quality drinking & cooking water from the treated chemical water supplied to our towns & cities now day’s. Our water can be supplied from dams, rivers, bores, recycled systems & even sea water from desalination plants, then a massive amount of chlorine & chemicals is added.
This cartridge has been tested over & over again all around the world and has some of the best test results we have ever seen. We highly recommend this water filtration cartridge for any 10” x 2.5” water filtration systems. This cartridge can be used on its own in a single housing water filter or with other cartridges in a system, it does have the test results to stand alone.
This cartridge is highly recommended. Removing chlorine, chloramine, heavy metals, herbicides & pesticides, cysts, bacteria, virus and sediments. This cartridge is a real all-round cartridge with very good test results.
Aragon represents the most up-to-date technology for water treatment and viruses, bacteria and cysts removal. That makes it possible to get completely safe and health-promoting water without boiling.
-
This filter can be used as the main element in your water filter water or decontamination systems or as one of the pretreatment stages, eg. as a part of the membranes protection against bio contamination.
-
The Aragon Plus is comparable to polymeric UF/MF membranes (that are for domestic use) in efficiency. But it has greater productivity and significantly lower pressure drop.
-
Provides higher efficiency of filtration and kinetic absorption as compared to standard non-woven fabrics including granular activated carbon.
-
Absolutely environmentally-friendly. It can be used for potable water treatment and decontamination according to GOST R 51871-02, 51232-98.
Perfect for both Treated and Non-Treated Water
This unique cartridge is based on the innovative, patented Aragon Media. It has been extensively tested by Certified
Laboratories in Europe, to effectively remove chemicals, pesticides, bacteria and heavy metals as well as sediment down to >2 microns.
This high quality extruded carbon block cartridge is equally effective at purifying both hot and cold water.
Stage 3 - Alkaline
This filter actively raises your water’s pH level as well as producing antioxidant and minerals for easy body absorption, resulting in great tasting water of a high alkaline pH level containing healthy life enhancing qualities.
How to Install and Flush the Fluoride Removal Replacement Cartridge
Follow these essential steps to ensure optimal performance and the best-tasting filtered water:
- Unpack the Cartridge – Carefully remove the new fluoride removal replacement cartridge from its packaging.
- Prepare for Installation – Connect the cartridge to your water filter system, but do not turn on the water yet.
- Remove Downstream Cartridges – Take out all filtration cartridges that come after the fluoride removal cartridge (typically positioned in slot 2 & 3). Handle ceramic cartridges with extra care, as they are delicate.
- Install the Fluoride Cartridge – Securely place only the fluoride removal cartridge into the system.
- Initial Flush – Turn on the water supply and check for leaks. Flush the system for 20 minutes with only the fluoride removal cartridge installed. If desired, the flushed water can be collected for watering plants.
- Release Pressure – Turn off the water supply and open the faucet to release pressure and drain the system.
- Reinstall Remaining Cartridges – Carefully place the other filtration cartridges back into their original positions.
- Secure and Check for Leaks – Tighten all filter housings and turn the water supply back on. Inspect for any leaks.
- Final Flushing – Flush the entire system for 10 minutes.
- Post-Installation Flush – After 12 hours, flush the system again for 3 minutes.
Your water filter system is now ready for use!