Omnipure Fluoride Removal Cartridge 10" x 2.5″
Couldn't load pickup availability

FREE SHIPPING for orders over $100 in Australia.
Flat $10 shipping fee for orders under $100.
We use several couriers including Australia Post, Sendle and others.
Overseas orders. discounted shipping is calculated during checkout.
Omnipure Fluoride Removal Cartridge 10" x 2.5″
Suits:
Aquarius Triple Bench Fluoride Alkaline Aragon
https://alkalineworld.com.au/collections/kitchen/products/aquarius-triple-bench-fluoride-alkaline-aragon
And
Aquarius Under sink Triple Stage System
https://alkalineworld.com.au/collections/kitchen/products/aquarius-under-sink-triple-stage-system
The Omnipure Fluoride Removal cartridge is your solution for clean, safe drinking water. This high-performance filter effectively removes 97% of fluoride from your water supply, providing you with fresh, pure water for drinking and cooking.
Specifications:
- Flow Rate: 10 litres per min
- Filter life: 1,800 litres or 12 months
- Size: 2.5″ x 9″ or 2.5″ x 10″, suitable for most standard size housings
- Micron: 5 micron*
- Manufactured in USA by Omnipure
Extended Cartridge Life
In addition to its exceptional filtration capabilities, this cartridge is designed to maximize the time between replacements. By effectively removing impurities, it extends its lifespan, ensuring consistent water quality for longer periods.
NSF Certified and Standard Compatibility
Tested and certified by NSF International against NSF/ANSI Standard 42 for material requirements, this filter cartridge meets the highest quality standards. Its standard 10″ size ensures compatibility with most under-counter and countertop filter systems, making it a convenient choice for your home or office.
Pleated Design for Low-Pressure Applications
Featuring a pleated design, this cartridge is particularly well-suited for low-pressure applications, such as residential water supplies. This design allows for efficient filtration while maintaining adequate water flow.
Ease of Installation and Replacement
Omnipure’s commitment to user-friendly products extends to this filter cartridge. Installation is straightforward, and replacement is quick and sanitary, ensuring a hassle-free experience when it’s time for a new cartridge.
Please Note: when changing the fluoride cartridge it is important that the fluoride cartridge is flushed alone to prevent it from flushing into the next stages of filtration. Flush water through this cartridge in the system for 20 minutes before adding the next stages.
How to Install and Flush the Fluoride Removal Replacement Cartridge
Follow these essential steps to ensure optimal performance and the best-tasting filtered water:
- Unpack the Cartridge – Carefully remove the new fluoride removal replacement cartridge from its packaging.
- Prepare for Installation – Connect the cartridge to your water filter system, but do not turn on the water yet.
- Remove Downstream Cartridges – Take out all filtration cartridges that come after the fluoride removal cartridge (typically positioned in slot 1 or 2). Handle ceramic cartridges with extra care, as they are delicate.
- Install the Fluoride Cartridge – Securely place only the fluoride removal cartridge into the system.
- Initial Flush – Turn on the water supply and check for leaks. Flush the system for 20 minutes with only the fluoride removal cartridge installed. If desired, the flushed water can be collected for watering plants.
- Release Pressure – Turn off the water supply and open the faucet to release pressure and drain the system.
- Reinstall Remaining Cartridges – Carefully place the other filtration cartridges back into their original positions.
- Secure and Check for Leaks – Tighten all filter housings and turn the water supply back on. Inspect for any leaks.
- Final Flushing – Flush the entire system for 10 minutes.
- Post-Installation Flush – After 12 hours, flush the system again for 3 minutes.
Your water filter system is now ready for use!