Aquarius Fluoride & PFAS Removal Whole House Water Filter System – Stainless Steel Cover
Pickup available at 30 Fabio Court
Usually ready in 1 hour
FREE SHIPPING for orders over $250 in Australia.
Flat $10 shipping fee for orders under $250.
We use several couriers including Australia Post and others.
Overseas orders. discounted shipping is calculated during checkout.
Not sure which product, water-filtration system or replacement cartridge is right for you? Contact our Australian team before ordering. We can help you compare options, check compatibility and understand installation requirements.
Contact Alkaline WorldAquarius Fluoride & PFAS Removal Whole House Water Filter System
This Aquarius whole-house system combines sediment filtration, a dedicated fluoride-reduction cartridge and a Disruptor stage in three 20" x 4.5" housings with a stainless steel cover. It is designed for installation on the incoming cold-water line to supply the connected taps, showers and appliances.
System specifications
| Filtration stages | Three: sediment, fluoride reduction and Disruptor |
|---|---|
| Cartridge format | 20" x 4.5" |
| Cover | Stainless steel |
| System service flow | Up to 50 litres per minute, depending on supply pressure, plumbing and cartridge condition |
| Installation | Whole-house point-of-entry installation on the incoming cold-water line by a licensed plumber |
The three included filtration stages
- Polyspun sediment filter: a triple-layer polypropylene cartridge captures particles such as sediment, rust, sand and silt to help protect the downstream filters.
- Fluoride-reduction filter: contains activated alumina media selected for fluoride reduction. Performance and service life depend on the incoming water, flow and condition of the media.
- Disruptor 20" x 4.5" cartridge: selected for PFOA and PFOS reduction, with additional chlorine, chloramine and selected metal reduction functions depending on the cartridge supplied.
Choosing the system for your water
The 50 L/min figure describes system service flow. Fluoride and PFAS reduction depend on water conditions, contact time and cartridge maintenance. For a specific contaminant target, call our Melbourne water specialists on 03 9357 1777 with your water test results so we can confirm the cartridge configuration and relevant performance information before you order.
Matching replacement filter set
The Fluoride Removal Replacement Filters Whole-House Triple System 20" x 4.5" contains one Polyspun Sediment Filter, one Fluoride Reduction Filter and one Disruptor Advanced Filter Cartridge in the 20" x 4.5" format.
Check the labels and fittings on your installed cartridges before ordering, especially if the system has been configured differently. The matching replacement set is recommended for replacement approximately every 12 months under typical household conditions; water quality and use can require earlier replacement.
Installation and ongoing care
Professional installation is required. Ask your licensed plumber to confirm the incoming pressure, operating limits of the supplied components and sufficient space for cartridge changes. Flush new cartridges according to their supplied instructions.
Keep a record of installation and cartridge replacement dates. Monitor flow and arrange servicing when due; a water test before and after installation can help assess performance for a specific contaminant.
Need help choosing the configuration or replacement set? Call 03 9357 1777.
