Aquarius Fluoride Removal Whole House Water Filter System – Stainless Steel Cover

Quick Decision Summary

• Installation type: whole-house or point-of-entry filtration on the incoming cold-water line.
• Primary focus: fluoride reduction, with additional sediment, chlorine, PFAS and heavy-metal reduction functions described by the installed cartridges.
• Housing: high-capacity 20-inch × 4.5-inch format with a stainless-steel cover.
• Service flow: up to 50 litres per minute under suitable conditions; actual household flow depends on pressure, plumbing and cartridge condition.
• Maintenance: cartridges generally require replacement around every 12–18 months, but may need earlier replacement depending on water quality and use.
• Not a water softener: filtration and contaminant reduction do not necessarily remove hardness minerals or prevent every form of scale.
• Not guaranteed disinfection: where microbiological safety is uncertain, obtain professional testing and use an appropriate validated treatment or disinfection process.

Pre-Purchase Checklist

• Confirm the target contaminants and obtain a recent water analysis where appropriate.
• Confirm pH and other water conditions relevant to fluoride-adsorption performance.
• Ask a plumber to verify pressure, connection size, flow demand and installation space.
• Allow service clearance beneath the housings and protect the system from freezing, heat and direct weather exposure.
• Confirm the replacement-filter set, current replacement cost and expected service interval.
• Review warranty requirements before installation.

Need help confirming suitability? Call our Melbourne water specialists on 03 9357 1777 before ordering.

Free Australia-wide standard shipping on eligible orders over $250.

Whole-House Water Filtration System (Purple Series)

High-capacity filtration for large homes – up to 50 L/min flow rate

Experience crystal-clear, great-tasting water throughout your entire home with our premium triple-stage whole-house filtration system. Designed for large dwellings, this system delivers exceptional performance — filtering up to 50 litres per minute — ensuring filtered water throughout the home.

Comprehensive Contaminant Removal

Using the most advanced, premium-grade filters available, this system is designed to reduce or capture the following, depending on incoming water conditions, flow and filter condition:

✔ Sediment, rust, and sand
✔ Chlorine and chloramines
✔ Fluoride and arsenic
✔ Pesticides and herbicides
✔ Volatile organic compounds (VOCs)
✔ Heavy metals (lead, copper, aluminium)
✔ Parasites, bacteria, and viruses
✔ Scale and limescale build-up
✔ Unpleasant taste, odour, and discolouration

3-Stage Filtration Process

Stage 1 – Sediment Filter

A triple-layer polypropylene cartridge maximises contaminant capture and filter life. It provides a resilient barrier to bacteria and chemical buildup, preventing algae and waste accumulation.
Removes sediment, rust, sand, and silt — ensuring clear water and protecting downstream filters.
Manufactured using a binder-free thermal bond process for durability and purity.

Stage 2 – Fluoride & Heavy-Metal Filter

Our fluoride filter uses premium activated alumina — a widely used adsorptive media selected for fluoride, lead and arsenic reduction under suitable operating conditions.

Key Benefits:

• Reduces fluoride concentrations by up to 99% (to below 0.1 ppm).

• Protects against fluoride exposure through drinking, skin absorption, and inhalation.

• Removes lead and arsenic without adding any harmful chemicals.

• Rated Best Available Technology by the US EPA.

• Non-hazardous, pre-treated media for maximum adsorption capacity.

Size: 20" × 4.5" — fits all standard Big Blue housings.

Technical note:
Unlike absorption (where contaminants can leach out over time), adsorption adsorbs contaminants onto the media under suitable operating conditions; timely cartridge replacement remains essential.

Stage 3 – Disruptor Filter

Filter Type: Combines electro adsorptive nanotechnology, high-performance activated carbon block, and membrane filtration to achieve advanced multi-stage contaminant reduction in a single compact unit.

Specialised removal of key PFAS Compounds, including PFOA and PFOS, alongside Viruses, Bacteria, Parasites, Heavy Metals, Chlorine and Chloramines.

The Disruptor® Filter Cartridge delivers advanced, broad-spectrum contaminant removal through its innovative multi-stage filtration design.

This high-performance cartridge integrates several cutting-edge filtration mechanisms into a single compact unit:

• Electroadsorptive nanotechnology actively attracts and captures charged contaminants.

• Depth filtration ensures efficient particle removal throughout the entire media structure.

• High-surface-area nanofibers enable fine filtration down to submicron levels.

• Submicron membrane layers effectively trap viruses, bacteria, and microscopic debris.

• Premium-grade activated carbon further reduces PFAS compounds (including PFOA and PFOS), heavy metals, chlorine, and volatile organic chemicals.

The filter is also bacteriostatic, helping inhibit bacterial growth within the media. By combining mechanical filtration, adsorption, and electroadsorption in one system, the AquaCo® Disruptor® cartridge provides comprehensive water purification for both residential and commercial applications.

Certified Reduction Claim

• PFOA (Perfluorooctanoic Acid) > 98.9%
• PFOS (Perfluorooctane Sulfonic Acid) > 99.0%
• Total Chlorine (Chloramines) > 99.3%
• Free Chlorine > 99.5%
• Lead (Pb) > 99.4% @pH 6.5
• Lead (Pb) > 99.4% @pH 8.5
• Copper (Cu) > 99.9% @pH 8.5
• Copper (Cu) > 99.9% @pH 6.5
• E.Coli (Total Coliforms) > 99.9999%
• Coliphage (Bacterial Virus) 99.9995%

Specifications

• Certified to reduce PFOA, PFOS, Chlorine, Taste, Odours, Heavy Metals (Copper, Lead...), Chloramines, Bacteria, Viruses, and Parasites.
• Designed in Australia with German and Swedish Components.
• Suits 20" x 4.5" housings/casings.
• Filtration Media: 4 levels of filtration .
• Tested to NSF/ANSI 42 & 53 aesthetic effects and health effects testing.

Maintenance

• Requires changing every 12-18 months. However, replacement frequency also depends on water quality and usage.

Specifications:

Features:

• Easy Swap - Changing filters is quick and easy.
• Disruptor® features the latest technology in water filtration. Removes over 98% of PFOA and PFOS from the water.
• High Flow Rate - Delivers clean water at 50 LPM.
• Disruptor filtration media is designed to capture or reduce bacteria and virus-sized contaminants under the stated test conditions; it should not be represented as guaranteed disinfection.
• Its carbon block core has silver impregnated that prevents bacteria growth and also removes heavy metals, chloramines and other hard to remove contaminants.
• Disruptor® filter media utilizes a proprietary electroadsorptive technology to remove submicron contaminants from water. While the media's average pore size is between 1.2 to 1.5 microns, its electropositive charge enables it to capture much smaller particles, effectively removing viruses, bacteria, and other pathogens.

Cleaner, softer, safer water — from every tap in your home.